WALL SEALING &
WATERPROOFING: XYPEX

The Xypex crystalline system for concrete waterproofing is substantially different from traditional barrier products — like membranes and cementitious coatings.

WALL SEALING AND WATERPROOFING: XYPEX

To remove water entering through your walls, Matteo Renovations provides a special wall coating. Established 40 years ago for underground concrete structures, Xypex Crystalline waterproofing technology. This unique coating can be applied to damp/wet walls from the inside, reduces vapor drive, waterproofing the walls, and decreases the water presence that can lead to mold and fungus.

This is not a painting or a product shown on TV. A blend of Portland cement, sand, and patented non-toxic, potable water certified, no VOC powder chemicals, is this basement waterproofing coating. It is permanent, can be painted and concrete can be sealed up to 12″.

THE APPLICATION ADVANTAGES

The Xypex crystalline system for concrete waterproofing is substantially different from traditional barrier products — like membranes and cementitious coatings.

WHY XYPEX IS DIFFERENT?

the XYPEX difference

 The crystalline nature of the Xypex waterproofing system provides many application advantages over traditional barrier products.

 Xypex does not require a dry surface; in fact, a wet surface is necessary.

 Xypex does not require dry weather to be applied.

 Xypex does not require costly surface priming or leveling prior to application.

 It cannot puncture, tear, or come apart at the seams.

 It does not require protection during backfilling or during placement of steel, wire mesh or other materials.

 It can be applied on either side of a concrete surface – the negative or the positive (water pressure) side.

 Xypex does not require sealing, lapping and finishing of seams at corners, edges or between membranes.

 It is less costly to apply than most other methods.

CHECK THESE DIFFERENCES:

 Xypex creates a crystalline structure deep within the pores and capillary tracts of the concrete mass to prevent the penetration of water and aggressive chemicals. In contrast, barrier-type products function only at the surface of the concrete.

 Because Xypex is not dependent on surface adhesion to achieve its waterproofing effect, it is resistant to extreme hydrostatic pressure.

 It will seal static hairline cracks up to 0.4 mm.

 It is not subject to the deterioration problems encountered by membranes.

 Xypex is permanent and reactivates whenever water is present.